If you are a first time homeowner or maybe someone who has just moved out of Mom and Dad’s humble abode, you may not know a lick about plumbing, but there are certain things that you should know. This article will discuss some of them, and you will be more knowledgeable after reading the tips below.
Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.
A great tip to use to stop your septic tank from backing up is to make sure you have it pumped at least every five years. Having it cleaned out prevents the sediment from accumulating in the septic tank and creating a sewage backup in your house or triggering the meltdown of the entire septic system. It is a small price to pay now to keep your septic in good working order and prevent having to pay for a major repair caused by a backup.
To help you find a good plumber, you should get recommendations from people whom you trust. Asking a friend or a neighbor is usually more trustworthy than picking a random plumber out of the phone book. You need a competent plumber, otherwise you could be in for a much bigger problem down the road.
Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
Cleaning an aerator can remove sediment buildup that causes low water pressure. After removing the aerator, use an old toothbrush with some vinegar on it to clean the sediment off. Then all you need to do is rinse and reassemble the aerator before putting it back on the faucet. This should remove any obstructions that were in the aerator, thereby improving your water pressure.
Now that you have read these plumbing tips, you should feel a little more comfortable about looking after that scary hardware that lurks in some rooms of your home. Follow the advice above and you are sure to do the right things when tinkering around with any of the pipes.…